Solution: Windows Could Not Find the Recovery Environment

Using the reset or refresh option as a last resort for debugging tough issues that aren't responding to other solutions is something we recommend to Windows 10 users a lot of the time. But what if you try to reset and get the message that could not detect the recovery environment, which instructs you to restart your computer by inserting a Windows installation media disc or recovery media? Without the installation media disc, you'll be stranded and won't be able to finish refreshing your PC.

Page Table of Contents

Jean

Updated on Jan 12, 2024

0 Views | 0 min read

Workable Solutions Step-by-step Troubleshooting
Windows Could Not Find the Recovery Environment Create Windows 10 installation media...Full steps
Restore System Files and Settings...Full steps
Use System Restore when PC Won't boot You can use Windows 10's "Advanced startup settings"...Full steps
Prepare a WinPE Bootable Disk We can run EaseUS Todo Backup without system boot partitions...Full steps

What Causes the Could Not Find the Recovery Environment Error?

If the Windows Recovery Environment is deactivated for some reason, or if the WinRE image is missing or corrupted, this error is most likely to occur. Because the WinRE file is placed on the recovery disc, this error can also occur if it has been damaged or corrupted in any way.

could not find the recovery environment

Solutions to Windows Could Not Find the Recovery Environment

You'll be able to finish the solutions below in the order that they appear if you were intending on resetting or refreshing your computer because it is slow or because you are trying to troubleshoot another error.

Create Windows 10 installation media

If you can't reset your PC using the Settings app's Reset this PC option, you might be able to do so from the Windows 10 Recovery Media environment. To do so, you'll need a DVD or USB drive with the software already installed. This can be the DVD or USB that you used to install Windows, but it's also simple to produce.

Step 1. Go to Microsoft's website and download the Media Creation Tool application. Accept the terms and conditions that show when you open the executable file you just downloaded.

Step 2. From the second window, choose to Create installation media (USB flash drive, DVD, or ISO file) for another PC.

download and install windows

Step 3. The bootable drive's language, architecture, and other parameters will be determined by your computer, but you should uncheck the Because you need to accomplish this on a different computer, use the recommended options for this PC to select the suitable settings for the PC you're trying to fix the problem on.

Step 4. When requested to pick between USB drive or DVD, select USB drive or DVD, depending on which device you wish to use to store this ISO file.

win10 usb or iso

Step 5. Select the USB or DVD drive from the list of storage media linked to your computer by clicking Next.

Step 6. When you click Next, the Media Creation Tool will begin downloading the files needed to make the installation device.

We can start truly solving the resetting problem by inserting this installation disc you should boot from now that you most likely have your recovery media.

Step 1. Boot your computer and insert the installation drive you own or have just produced. The methods below are exclusive to Windows 10, so be sure to follow them carefully.

Step 2. A Choose your keyboard layout window will appear; select the one you want to use. Navigate to Troubleshoot > Reset this PC on the Choose an option screen.

windows 10 troubleshoot

Step 3. Select Keep my files or Remove everything from the Reset this PC window, depending on your objectives and how you want to reset your PC.

Step 4. The choice to Keep My Data will uninstall all installed apps and reset all settings, but your personal files will be preserved. The Remove Everything option does exactly what it says: it totally resets your computer.

reset this pc

Step 5. Wait for the procedure to complete before restarting your computer, and you may now use your newly reset machine.

Note: If your machine does not instantly start from the installation DVD, you may need to adjust some BIOS settings first. Because the default booting priority often prefers your hard drive above the installation medium and simply boots from the HDD, this must be done.

Restore System Files and Settings with Windows Recovery

Hopefully, you won't need to restore your system too often, but if it does, for example, if it keeps crashing or specific functions stop working, here's how to revert the modifications by restoring Windows to a prior state.

Step 1. Open the System Properties box in the same way we did before, and on the System Protection tab, select the "System Restore" button.

If the option is greyed out, you don't have any restoration points to choose from.

system restore

Step 2. To begin, click Next when the System Restore window appears. Choose the restore point to which you want to restore your system.

It's also worth checking which apps and drivers will be removed since they were installed after the restore point was created by clicking "Scan for affected programs." Click Next to continue.

Scan for affected programs

Step 3.  Review and confirm the restore point's details, then click the Finish button. This will restore your system to the state it was in at the time the point was created.

Remember that System Restore will require a restart of your PC to complete, so save any open files before clicking Finish.

Check and confirm the details of the restore point

Furthermore, System Restore cannot be interrupted while it is running. Because it can take a long time, it's a good idea to do anything else while you wait!

How to Use System Restore when Windows 10 PC Won't boot

If your computer won't boot up properly or crashes almost immediately, you can use Windows 10's "Advanced startup settings" to execute System Restore. Here's how to use this way to get to System Restore.

Step 1. Turn on or restart your computer, then hold down the F11 key as it boots up. Alternatively, when restarting your computer, hold down the Shift key.

A blue screen with the words Choose an option will appear. From the drop-down option, select Troubleshoot.

choose an option

Step 2. Now you'll be sent to the "Advanced options" screen. If you don't see a button with that name, look for one and click it.

Select the System Restore option in either case.

select the system restore option

Prepare a WinPE Bootable Disk

WinPE (also known as Windows Preinstallation Environment or Windows PE) is a small version of Windows that can be used to deploy PCs, workstations, and servers, as well as troubleshoot operating systems while they are offline.

It can be started from a USB flash drive, a hard disc, or other media. WinPE is used by large organizations and OEMs such as Dell, HP, Asus, Acer, and Lenovo to preinstall the operating system on PCs during the production process. As a result, after purchasing, you will receive a machine with Windows 11/10/8/7 installed. WinPE has the following features:

  • Download the Windows operating system and once done, install.
  • Before installing Windows 11/10/8/7, make sure your hard drive is ready.
  • Create Windows images and apply them.
  • To recover system files, use recovery tools like Windows RE (Windows Recovery Environment).
  • Resolve issues with system boot failure.
  • Manage disc partitions that aren't possible to do in Windows, such as formatting the C drive.
  • Provide a platform for third-party disc cloning software to run on.

We may require a WinPE bootable disc if the operating system fails to boot, or if we need to move the system from a backup image to another HDD/SSD. We can run EaseUS Todo Backup without system boot partitions in the pre-installation Environment and recover system/data from the backup. EaseUS Todo Backup offers two options for creating a bootable CD or DVD: Linux-based bootable discs and WinPE-based bootable discs.

Step 1. Prepare a USB drive which can be written and read.

Create emergency disk

Step 2. Launch and install EaseUS Todo Backup on the Computer B.

Step 3. Find and click "Tools" and choose "Create Emergency Disk".

Create Emergency Disk

Step 4. Choose the Boot disk location. You can create an ISO file, a bootable USB or CD/DVD disc.

Create emergency disk step2

Step 5. Then click "Create" to start.

Conclusion

Finally, while attempting to reset your computer, Windows may be unable to locate the recovery environment. In this article, we've discussed possible solutions for the problem Windows Could Not Find the Recovery Environment.

It's now your turn. You can try to address the problem using one of these. Other backup options, in our opinion, are less trustworthy and effective than Ease US To-do backup.

EaseUS Todo Backup

EaseUS Todo Backup is a dependable and professional data backup solution capable of backing up files, folders, drives, APP data and creating a system image. It also makes it easy to clone HDD/SSD, transfer the system to different hardware, and create bootable WinPE bootable disks.

  • Updated by

    Daisy

    Daisy is the Senior editor of the writing team for EaseUS. She has been working at EaseUS for over ten years, starting as a technical writer and moving on to being a team leader of the content group. As a professional author for over ten years, she writes a lot to help people overcome their tech troubles.…
    Read full bio
  • Written by

    Jean

    Jean is recognized as one of the most professional writers in EaseUS. She has kept improving her writing skills over the past 10 years and helped millions of her readers solve their tech problems on PC, Mac, and iOS devices. …
    Read full bio

EaseUS Todo Backup

Smart backup tool for your files, disks, APPs and entire computer.

  Try It Now

Support Windows 11/10/8/7

Topic Clusters