How to do Windows 11/10 boot repair? What are the most useful ways? Read this tutorial and see how to troubleshoot.

Workable Solutions Step-by-step Troubleshooting
Fix 1. Use Startup Repair You can fix most Windows 11/10 UEFI boot problems using the Startup Repair tool. Boot Up Windows...Full steps
Fix 2. Run Boot Repair Software Start EaseUS Partition Master after connecting the external drive/USB to your computer...Full steps
Fix 3. Use Command Prompt If you are unable to perform a startup repair, then you can try using Windows 11/10 installation...Full steps
Fix 4. Change BIOS Settings Windows 8, 8.1, 10 and 11 were designed to install on the UEFI BIOS using the EFI bootloader and GPT...Full steps
Fix 5. Add Disk Driver Manually installing and adding the driver to the restored Windows image can repair UEFI boot...Full steps
Fix 6. Change the SATA Mode You can change different SATA modes in different cases for Windows 11/10 boot repair...Full steps

Sometimes, Windows 11/10 fails to boot because there is a problem with the master boot record. In these cases, the master boot record needs to be repaired to restart and run. When you want to do Windows 11/10 startup repair, you can use the Windows 11/10 recovery environment, which includes an automatic option to accomplish this task. If this does not work, you can do it manually with the Diskpart command prompt and other effective solutions. In this article, you'll find step-by-step methods to guide you to fix computer UEFI boot errors in Windows 11/10/8/7. Read on to find out how.  Before you start, you can clone your boot drive to another drive with EaseUS Partition Master. Then, follow these steps to fix Windows 11/10 boot repair.

- EaseUS Partition Master -

Your Smart Windows 11 Update Disk Manager

  • MBR to GPT Converter, Make Disk Ready for Windows 11.
  • Boot Repair for a variety of startup issues.
  • Handy to Extend or Combine Partitions in Windows 11.
  • Clone and Upgrade Disks without Data Loss.
Free DownloadWindows 11/10/8/7

You may also read the article below: 

related articles

Windows 10 Boot Repair: Fix Windows Startup Issues Now!

This post will go over six helpful techniques that users can utilize Windows 10 boot repair to resolve starting issues.

windows 10 boot repair

Method 1. Use Startup Repair for Windows 11/10 Boot Repair

Windows provides some built-in boot repair tools. Windows Automatic Repair is a for users to apply and try to fix some normal errors on Windows PCs. You may also try this method to repair Windows 11, 10, 8, or 7 UEFI/EFI boot errors:

1. Boot Up Windows from Installation Media

Step 1. Insert Windows 11/10/8/7 installation disk or USB to your PC.

Step 2. Restart the PC and boot from the disk or USB.

2. Enable Automatic Repair Option

Step 1. Click "Repair your computer" on the "Install now" screen.

Enable Automatic repair option to fix UEFI error.

Step 2. Click "Troubleshoot" by choosing an option screen > click "Automatic repair".

automatic-repair-msi

Step 3. Choose an account from the list to continue at the Automatic Repair screen and wait for the process to finish.

When the process is complete, you can restart your PC, and then you should be able to use your computer without any problems again. This way has helped a lot of users facing the UEFI boot error; share this article to help more people.

 

Method 2. Run Boot Repair Software to Fix UEFI Boot Error

Although it is convenient to have a built-in tool for error repairing, sometimes it doesn't do well in boot issue troubleshooting. Therefore, you can download a boot issue troubleshooting tool to automatically detect and analyze the problems in your system and fix them without manual operation.

Free Download 

Windows 11/10/8/7100% Secure

One of the most well-known tools is EaseUS Partition Master, which offers the Boot Repair feature and advanced algorithm that can examine and repair errors on your Windows computer in a few seconds.

Step 1. Start EaseUS Partition Master after connecting the external drive/USB to your computer, go to "Bootable Media," and click "Create bootable media."

create easeus partition master bootable disk

Step 2. Select an available USB Drive or CD/DVD and click "Create." You can also burn the Windows ISO file to the storage media.

create easeus partition master bootable disk

Step 3. Connect the created bootable drive to the new computer and reboot the computer by pressing and holding F2/Del to enter the BIOS. Then, set the WinPE bootable drive as the boot disk and press F10 to exit.

Step 4. Boot the computer again and enter the WinPE interface. Then, open EaseUS Partition Master and click "Boot Repair" under the "Toolkit" option.

open boot repair

Step 5: Select the system you want to repair and click "Repair."

click  repair

Step 6. Wait a moment, and you will receive an alert that the system has been successfully repaired. Click "OK" to complete the boot repair process.

click ok to complete the repair

Method 3. Use Diskpart to Fix UEFI Boot Error in Windows 11/10

If you are a Windows 11/10 or 8 user and you prefer free methods to fix UEFI boot errors, you may follow the two solutions below to solve this issue now:

1. Enter Command Prompt from Advanced Options

Step 1. Insert Windows 11/10/8/7 installation disk or installation USB into PC > boot from the disk or USB.

Step 2. Click "Repair your computer" or hit "F8" on the "Install now" screen.

Step 3. Click "Troubleshoot" in Advanced options, and click "Command Prompt".

2. Run Diskpart to Set Partition ID and Assign a Drive Letter

Step 1. Type the below command and hit Enter each time:

  • diskpart
  • list disk
  • sel disk 0

Run Disk Part to start fixing UEFI error.

Step 2. When the message "Disk 0 is now the selected disk" shows up, type list vol and hit Enter.

Select disk and volume to set volume ID.

Diskpart will now show the full list of volumes on your PC, find UEFI volume from the list: UEFI partition will be on Volume 2.

Step 3. Type below command and hit Enter each time: 

  • sel vol 2
  • set id=c12a7328-f81f-11d2-ba4b-00a0c93ec93b 
  • Or SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7

Set volume ID to fix volume id.

Step 4. Assign the drive letter by typing below command and click Enter:

  • assign letter=G: (Note: G shall be a unique drive letter which cannot be already used.)

Change drive letter of your selected partition.

3. Repair the Boot Record

  1. Step 1. Open Command Prompt as an administrator, enter below command:
  • cd /d G:\EFI\Microsoft\Boot\ (Note: G is the drive letter you signed to UEFI partition and remember to replace G with UEFI's partition letter)

Repair boot record on UEFI disk.

  • Enter exit when the process completes.
  1. Step 2. To repair the Boot Record, open CMD and enter below command line:
  • bootrec /fixboot

Fix boot record command.

  • Enter exit when the repair process completes.

Sometimes, you may come across 'bootrec /fixboot' with an access denied error. Relax and you may follow this guide for help:

4. Rebuild the BCD Store

Quick steps for rebuilding BCD:

Step 1. Type each command line and hit Enter each time:

  • ren BCD BCD.old
  • bcdboot C:\Windows /1 en-us /s G: /f ALL (Note: c:\ is the drive where Windows 11/10/8.1/8 is installed on.)

Rebuild BDC store on UEFI.

Step 2. Type exit in Command Prompt when the process completes and then restart your PC.

Now UEFI boot is fixed, and Windows 11/10/8/7 can be boot up on your PC again.

Method 4. Change BIOS Settings 

You need to select the boot mode according to the type of disk on your system. If you want to start an MBR system disk, you can select Legacy support instead of UEFI in boot mode. To start a GPT system disk, you need to select UEFI.

How to access BIOS: Common keys to enter the BIOS are "F1," "F2," "F10," "Delete," "Esc," as well as key combinations like "Ctrl" + "Alt" + "Esc" or "Ctrl" + "Alt" + "Delete," which are more common on older machines. You can enter the BIOS interface by holding down any of these keys while booting up on your computer.

Method 5. Add Disk Driver to Repair Windows 11/10 Boot

When you replace the RAID with a different machine or replace the original SATA or IDE disk with a newer NVMe SSD, you may encounter problems starting up. You can use the following Windows command line to manually add the driver to the restored Windows image.

Dism /Image:X: /Add-Driver /Driver:"y:\z.inf"

(X is the disk character of the restored Windows boot partition, and in double quotes is the location of the driver. Inf file.)

If you find this article helpful in fixing UEFI boot, don't forget to share it on your social media so that more users can get the help.

 

Method 6. Change the SATA Mode for Windows 11/10 Startup Repair

After the older XP system is restored, a blue screen or cycle start may occur. You can change to IDE mode to try to start.

If you run into boot problems after upgrading from an older HDD to a newer SSD, check to see if the BIOS is set to boot for AHCI. If you set it up for RAID mode, make sure the correct RAID driver is added to the cloned system.

Extended Reading: UEFI vs. BIOS: What's the Difference and How to Check

related articles

How to Fix Boot Manager Failed to Find OS Loader [100% Working]

Resolve the "Boot Manager Failed to Find OS Loader" problem effortlessly by exploring our expert-backed solutions. Follow step-by-step instructions to troubleshoot and resolve this issue.

boot manager

To Sum Up

Windows 11/10 boot repair is a rather complicated problem. There are different solutions for different causes and problems. The above approaches only apply to common UEFI boot issues. If none of them can repair the UEFI boot error in Windows 10, you can contact our technical support team to get specialized services for system boot issues.

Do You Need Specialized Data Recovery Services?
You may need further help for tough data loss situations like reformatting drives, RAW disks, partition loss, repartition failures, and system boot errors. Consult with EaseUS Data Recovery Experts for cost-efficient one-on-one manual recovery service. They could offer the following services after FREE diagnosis:
1. Unformat the drive
2. Repair the RAID, RAW disk, or operating system.
3. Recover lost partition (the one that cannot be recovered by software)

If you don't want to risk losing or overwriting your important data during the fixes for Windows 11/10 boot repair, you can recover data from a PC/laptop hard drive that won't boot with EaseUS Data Recovery Wizard, a renowned data recovery tool on the market.

To configure and optimize disk performance, you can also turn to EaseUS Partition Master for help.

Free Download 

Windows 11/10/8/7100% Secure

Windows 11/10 Boot Repair FAQs

The following four questions are highly relevant to UEFI boot repair. Check the answers to get you through.

1. How do you repair Windows 11/10 if it does not boot?

For Windows 11/10 UEFI boot repair, you can perform an automatic startup repair or use the command prompt to complete it. The step-by-step instructions are given each part, check the guides carefully.

2. How do I repair Windows 11/10?

To repair the Windows 11/10 boot, you can use the Startup Repair tool. To access the Windows 11/10 recovery environment, turn your computer on and off three times. While booting, ensure you turn off the computer when you see the Windows logo. After the third time, Windows 10 will boot into diagnostics mode. Click "Advanced options" when the recovery screen appears. Then, choose "Startup Repair" and follow the on-screen instructions to do it.

3. How can I repair the Windows 11/10 UEFI bootloader?

To fix the Windows 11/10 UEFI boot problem:

  • Insert the Media (DVD/USB) into your PC and restart
  • Boot from the media
  • Select Repair Your Computer
  • Select "Troubleshoot" in "Advanced Options"
  • Choose Command Prompt from the menu and use the dispart command lines: Type and run the command: diskpart. Type and run the command: sel disk 0. Type and run the command: list vol

4. How do I fix a boot startup problem?

There are many effective solutions to fix the Windows 11/10 startup issue and repair your EFI Bootloader. You can:

  • Use the Startup Repair tool
  • Use Diskpart in the Command Prompt
  • Fix BCD errors
  • Add startup item
  • Change BIOS settings
  • Add disk driver
  • Change SATA mode
  • Fix MBR
  • Restore and repair system partitions
  • more fixes...

Was This Page Helpful?

Updated by Oliver

Oliver is an EaseUS professional writer who dares explore new areas. With a passion for solving tech issues with straightforward guides for common users, Oliver keeps honing his writing craft by developing in-depth solutions for disk and partition management, computer boot-up issues, file transfer, etc.

Read full bio

Written by Tracy King

Tracy became a member of the EaseUS content team in 2013. Being a technical writer for over 10 years, she is enthusiastic about sharing tips to assist readers in resolving complex issues in disk management, file transfer, PC & Mac performance optimization, etc., like an expert.

Read full bio