EaseUS Partition Master

Fixes for (External) Hard Drive Shows Wrong Capacity

The hard drive or external hard drive showing wrong capacity may result from many reasons. If you happen to encounter this issue, try the practical methods in this article. Here, you will learn how to use EaseUS Partition Manager to solve hard drive showing the wrong capacity by formatting/initializing the hard disk, converting MBR to GPT, extend the hard drive, and more.

Free Download 

Windows 11/10/8/7100% Secure

Content

Total downloads

Page content

Updated by Sherly on Dec 29, 2023
Written by Jean

5+ Effective Fixes for Hard Drive Showing Wrong Capacity

It's very common to be faced with similar disk problems, such as SD card reporting the wrong size, and USB drives getting the incorrect size. If you are one of the victims of the hard drive showing the wrong capacity, you can deal with them with these effective solutions. Just read on; the content below will clear all your doubts.

Workable Solutions Step-by-step Troubleshooting
Fix 1. Update Hard Drive Driver Click "Start", type Device Manager, and press "Enter". Click and expand "Disk drives"...Full steps
Fix 2. Reformat the Hard Drive Click "Start", type cmd in the search box. Right-click on the Command Prompt and...Full steps
Fix 3. Convert MBR to GPT You can fix this problem by converting MBR to GPT and then extend the partition...Full steps
Fix 4. Initialize the Hard Drive In Windows 10/8, press "Windows + R" key, type diskmgmt.msc and click OK...Full steps
Fix 5. Check Physical Errors You should check and repair partition errors to rectify the problem...Full steps

Hard Drive Showing Wrong Capacity

What is demonstrated below is a real story of a user telling his 1TB hard drive, showing only 0.18TB of free space.

"My WD external hard drive gets a strange problem. It's advertised as 1TB, and I only use it as a backup hard drive. But today, I surprisingly find that the free space is only 0.18TB. That's impossible because the used space can't be more than 200GB. What happened? Why is the hard drive showing the wrong free space? Can I restore the full size? And how?"

A newly bought 500 GB HDD might display only 465 GB even with no data on it. Some external hard disks and USB flash drives may show another incorrect capacity issue, which is that the free space size hugely decreases. Is your hard drive corrupted when it shows the wrong capacity? Not really. There are quite a few reasons that lead to a hard drive showing less space than it should.

Why Does My Hard Drive Show Less Space Available

Excluding that you have bought a fake hard drive from an unscrupulous merchant, there are several reasons Windows could display the wrong amount of available space, like hidden files, formatting overhead, virus attacks, recovery partition occupancy, a hard drive issue, etc. In addition to what just mentioned, we list other common causes to help you understand why your (external) hard drive is showing the wrong capacity or free space.

  • The hard drive driver is out of date. In this case, the hard drive might show the wrong capacity in the Windows computer.
  • Format the hard drive using an inappropriate tool, or the formatting process is incomplete.
  • The hard drive has been initialized to the wrong partition table. If it is larger than 2TB but initialized to be MBR, the space over 2TB will be shown as "Unallocated" in Disk Management, and you can't see it in File Explorer. That's because the MBR partition table cannot address the space that exceeds 2TB.
  • Master Boot Record or EFI information area (GPT header) corrupts due to accidental insertion and removal.
  • Errors caused by bad sectors.

As you can tell, not all the events require fixes. Many hard drives are with an OEM partition or recovery partition for factory restore purposes, and it's usually invisible in My Computer. So, when you find a new hard drive showing less disk space than it advertised, go to "My Computer" (in Windows 7 and 8) or "This PC" (in Windows 8.1 and 10) > "Manage" > "Disk Management" and check the real space taking by the recovery partition.

For other simple causes, you can troubleshoot quickly. For instance, show hidden files and perform anti-virus to check whether the hard drive shows full capacity or not. If the problem is not solved, continue applying the corresponding solutions below. I hope they can help you. You can click the buttons below to share this article and let more users know how to fix this error.

 

Solution 1. Update Hard Drive Driver

Step 1. Click "Start", type Device Manager, and press "Enter."

Step 2. Click and expand "Disk drives". Right-click on the hard drive showing the wrong capacity and select "Update driver."

Step 3. Select "Search automatically for updated driver software." If this fails, you can manually search for and install the updated driver software on the official website. 

fix hard drive showing wrong capacity windows 10

If the hard drive driver is the latest one, but things still go wrong, you can try to uninstall and reinstall the driver. If the process of updating hard drive driver is too complex for you, you may turn to reliable driver updater software like EaseUS DriverHandy for help.

Solution 2. Reformat the External or Internal Hard Drive

The following two methods teach you how to format the hard drive with the command prompt and a partition management tool. The former requires particular computer technology. So if you are not familiar with CMD, to ensure safety, you'd better use the easy-to-use formatting tool in Method 1.

Warning
Disk Formatting will erase hard drive data, so make sure that you have backed up all critical data before the operations.

Method 1. Format Hard Drive with an Easy Formatting Tool

If you are not familiar with Command Prompt, you can turn to a professional and easy-to-use hard drive formatting tool. My recommendation is EaseUS Partition Master. Download it and format your HDD, SSD, SD card, or USB drive easily.

Free Download 

Windows 11/10/8/7100% Secure

Step 1. Right-click the hard drive partition and choose the "Format" option.

Step 2. In the new window, set the Partition label, File system, and Cluster size for the partition, then click "OK".

Step 3. You can see a warning window, click "Yes" to continue.

Step 4. Click the "Execute 1 Task(s)" button, then click "Apply" to start formatting the hard drive partition.

Free Download 

Windows 11/10/8/7100% Secure

Method 2. Format Hard Drive via Command Prompt

Compared to EaseUS Partition Master, CMD is a bit more complex for beginners to format a hard drive. Thus, you need to be very careful with the steps listed here:

Step 1. Click "Start", type cmd in the search box. Right-click on the Command Prompt and choose "Run as administrator".

Step 2. Type diskpart and press "Enter". Then, input and execute the following commands in order.

Step 3. Type list disk and press "Enter". All the disk drives will be listed, including your external drives that are connected to the computer.

Step 4. Check the number of the hard drive showing wrong capacity in Windows. Type select disk + disk number, and press enter. For example, select disk 1. You're telling diskpart to format disk 1.

Step 5. Go on to type clean. This step starts to clean up all files and folders on the selected hard disk.

Step 6. Type create partition primary and press "Enter". This way, there is a newly created partition on the disk.

Step 7. Type format fs=ntfs (or format fs=exfat) and press "Enter". You're telling diskpart to format the drive with a file system, let it be NTFS, exFAT, etc.

Step 8. Type assign to set a drive letter to the newly created partition.

fixes for external hard drive shows wrong capacity

That's a complete guide to partition primary and formatting hard disk via diskpart format commands. Is this method complicated for you? If so, turn to EaseUS Partition Master with one click.

Free Download 

Windows 11/10/8/7100% Secure

Solution 3. Convert Hard Drive from MBR to GPT

If the (external) hard drive shows less space than it should because of the MBR style, you can fix this problem by converting MBR to GPT and then extending the partition by adding the unallocated space.

The following video shows you to convert MBR to GPT with Windows Disk Management and EaseUS Partition Master. Disk Management demands that you delete all existing partitions first. If you persist in this way, remember to back up your hard drive at the beginning. Or you can download the partition manager to convert disk between GPT and MBR directly and keep partitions as well as data intact.

Free Download 

Windows 11/10/8/7100% Secure

After you have succeeded in converting MBR to GPT, continue to expand your disk as follows.

Step 1. Shrink partition to free up space to extend partition.

If the hard drive has enough unallocated space to extend the target partition, jump to Step 2, and continue. If not, free up space first:

  • At the Partition Manager section, right-click on a partition next to the target partition and select "Resize/Move".
  • Drag the partition ends to free up space, leaving enough unallocated space behind the target partition, click "OK".
free up disk space to get unallocated space

Step 2. Extend the target partition.

Right-click on the target partition you want to extend and select "Resize/Move".

extend partition -1

Drag the target partition handle into the unallocated space to extend partition.

extend partition -2

Step 3. Keep all changes.

Click the "Execute Task" button and click "Apply" to keep all changes.

extend partition -3

Solution 4. Back-Up Data and Initialize the Hard Drive

GPT header or MBR partition table errors cause most disk size errors. Under these circumstances, initialization can resolve drive showing wrong capacity issue.

Important
  • Disk initialization will wipe all the data. Export essential files at first.
  • If your hard drive is a new one, you can initialize it directly in two ways given below. If it's in use, you need to delete all the partitions before initializing it.

Method 1. Using Disk Management 

Step 1. In Windows 10/8, press the "Windows + R" key, type diskmgmt.msc, and click OK to launch Disk Management. In Windows 7, right-click Computer and then select the Manage option to run Disk Management.

Step 2. Find and right-click the hard drive or SSD you want to initialize, and then click "Initialize Disk". If the disk is listed as Offline, first right-click it and select Online.

initialize HDD/SSD in disk management

Step 3. In the Initialize Disk dialog box, select the correct disk to initialize. Then click OK to accept the default partition style, or you can change the partition style (GPT or MBR) as you want.

Method 2. Using EaseUS Partition Manager

Free Download 

Windows 11/10/8/7100% Secure

Step 1. Open EaseUS Partition Master and got to Partition Manager.

Step 2. Right-click the target disk - HDD or SSD and select "Initialize to MBR" or "Initialize to GPT". Click "Execute Task" and "Apply" to save the changes.

0:00-0:18 Initialize to MBR; 0:19-0:44 Initialize to GPT;

Solution 5. Check for Physical Bad Sectors or Replace the Disk

Too many bad sectors can make the disk unable to read and write correctly and show the wrong capacity in Windows. Thus, you should check and repair partition errors to rectify the problem. If the situation is terrible, and your hard disk has too many physical bad sectors, you have to consider replacing the new file after backing up the data.

Final words

These methods are available for you to address internal or external hard drives showing a wrong capacity issue in Windows 10/8/7. EaseUS Partition Manager is very helpful when formatting, initializing, converting, and resizing hard drives. Besides, it's also good at merging/creating/deleting partitions, recovering lost partitions, migrating OS to SSD, and so on. Try it anyway.

Free Download 

Windows 11/10/8/7100% Secure

External Hard Drive Showing Wrong Capacity FAQs

With these useful tips, you can solve your wrong capacity problem easily and quickly. If you have other related questions about hard drives only showing half capacity in Windows or other wrong capacities, you can read the following questions and answers.

Why do hard drives show the wrong capacity in Windows?

There are several reasons Windows could display the wrong amount of available space. They are:

  • Invisible shadow files
  • Formatting overhead
  • Hidden recovery partitions
  • Misleading storage capacities advertised by hard drive manufacturers and more.

How do I restore my hard drive to full capacity?

There are five effective ways to restore the hard drive to full capacity:

  1. Update Hard Drive Driver
  2. Reformat the Hard Drive
  3. Convert MBR to GPT
  4. Initialize the Hard Drive
  5. Check Physical Errors

How do I fix USB's incorrect size?

The best way to restore a USB drive to its full capacity is to format it. There is more than one way to do this job: you can format a USB flash drive using File Explorer, Command Prompt, Disk Management, or a third-party partition manager - EaseUS Partition Master.

How do I check the capacity of my external hard drive?

To check the capacity of the external hard drive:

Step 1. Open File Explorer. Right-click on your external hard drive.

Step 2. Select Properties.

Step 3. You can see the capacity of your flash drive, including the capacity, used space, and free space.

How Can We Help You

About the Author

Updated by Sherly

Sherly joined EaseUS in 2022 and she has always loved writing articles and enjoys the fun they bring. She receives professional training here, focusing on product performance and other relative knowledge. She has written over 200 articles to help people overcome computing issues.

Read full bio

Written by Jean

Jean is recognized as one of the most professional writers in EaseUS. She has kept improving her writing skills over the past 10 years and helped millions of her readers solve their tech problems on PC, Mac, and iOS devices.

Read full bio

Product Reviews

Product Reviews

TrustScore 4.7 | 49 reviews
  • I love that the changes you make with EaseUS Partition Master Free aren't immediately applied to the disks. It makes it way easier to play out what will happen after you've made all the changes. I also think the overall look and feel of EaseUS Partition Master Free makes whatever you're doing with your computer's partitions easy.

    Read More
  • Partition Master Free can Resize, Move, Merge, Migrate, and Copy disks or partitions; convert to local, change label, defragment, check and explore partition; and much more. A premium upgrade adds free tech support and the ability to resize dynamic volumes.

    Read More
  • It won't hot image your drives or align them, but since it's coupled with a partition manager, it allows you do perform many tasks at once, instead of just cloning drives. You can move partitions around, resize them, defragment, and more, along with the other tools you'd expect from a cloning tool.

    Read More

Get EaseUS Partition Master

Your best companion for disk partitioning, MBR to GPT/GPT to MBR conversion,even OS migration

Free Download 

Windows 11/10/8/7100% Secure