Fixed: The Computer Has Rebooted From A BugCheck [2024]

Experiencing frequent computer reboots with the dreaded BugCheck error? Discover the causes behind this frustrating problem and learn practical solutions to fix the 'computer has rebooted from a bugcheck' error in our comprehensive guide.

Key Takeaways:

• BSOD, or "The computer has rebooted from a bugcheck," indicates a serious error caused by hardware issues or outdated drivers. 
• The problem may cause a system crash or more serious damage. You can fix it by updating drivers, performing System File Check, Memory Check, etc.
• The error is usually related to hardware problems, such as RAM, memory problems, or corruption of system files.

Encountering sudden reboots and the "Computer Has Rebooted From A BugCheck" error can be frustrating. This article explores the meaning, causes, and solutions for this critical system error, commonly known as the Blue Screen of Death (BSOD). From hardware failures to outdated drivers, EaseUS will cover it all.

How to Fix The Computer Has Rebooted From A BugCheck?

Effective ways to resolve the "Computer Has Rebooted From A BugCheck" error exists. As the causes and reasons for that error can differ, we provide you with eight solutions/methods to tackle this issue independently. You can check their difficulty and efficiency:

You can jump directly to the program you need or view step-by-step instructions for each program in turn.

Method 1: Uninstall the Device Driver

Sometimes Damaged and incompatible device drivers could disrupt your system and cause the error "Computer Has Rebooted From A BugCheck." We need to uninstall problematic device drivers to fix it, but make sure to disconnect any external devices if you recently connected. 

Follow the steps:

Step 1. Go to the "Device Manager." Type it in the Windows search bar and press "Enter."

Step 2. Locate the device driver you installed recently.

Step 3. Right-click on the problematic driver and click "Uninstall device."

Step 4. Check on the "Delete the driver software for this device" and proceed by clicking on Uninstall.

Step 5. Restart your computer.

Method 2: Update the Device Driver

Updating the device drivers solve the issue, as outdated drivers can be caused this error, "The Computer Has Rebooted From A BugCheck." Follow the steps:

Step 1. Open Device Manager, right-click the Graphics and the Audio drivers, and click "Update Driver."

Step 2. Click "Search automatically for the drivers."

Note: Most of the time, Graphics and Audio drivers cause this issue, so update them prior, and if you find another driver is also outdated, you can update similarly. If you fail to update drivers automatically from Device Manager, you can manually update them through Windows Update.

Method 3: Run Windows Memory Diagnostic Tool

Insufficient system memory or malfunctioning RAM could lead your computer to this BSOD problem. Running Windows memory check offers to assess the condition of your system's memory quickly. If there are any memory-related problems, your system could suffer this error. Here's how to run the Windows Memory Diagnostic tool:

Step 1. Open the Windows Memory Diagnostic app by searching for "Windows Memory Diagnostic" in the Windows search bar.

Step 2. Choose the "Restart now and check for problems" option.

Step 3. The test will initiate upon system restart. Allow the test to complete.

Step 4. After the test concludes, the system will restart and exhibit the test findings.

Step 5. If any instructions appear on the screen, adhere to them accordingly.

Method 4: System File Check

You can check for issues through System File Checker (SFC) functionality that exists in Windows. However, if you want an easy and fast solution, EaseUS Partition Master is the best option. It can scan and replace damaged and corrupted files. Follow the steps:

Step 1. Right-click the target partition that has a problem.

Step 2. Choose "Advanced" > "Check File System".

Step 3. Confirm if you want to hide the partition or not.

Step 4. In the Check File System window, check the "Try to fix errors if found" option.

Step 5. Click "Start" to check errors on your partition.

Other Features of EaseUS Partition Master:

Method 5: Check the Disk

You can also fix corrupted hard drive with CMD. Windows provides Check Disk "CHKDSK" feature, which identifies issues on your hard drive with the file system check. Follow the steps to check the disk:

Step 1. Run CMD as administrator. Type the "chkdsk /f /x /r" command to check the disk issues and let it attempt automatic repair.

Step 2. When the volume is actively used, you will receive a notification to arrange the disk check for the upcoming system restart.

Step 3. Confirm by pressing Y and proceeding to reboot the device.

Step 4. Allow the Disk Check to commence without pressing any keys; simply await its initiation.

Method 6: Perform a System Restore

If the error "The Computer Has Rebooted From A BugCheck" still exists. You can perform a system restore. As this solution affects your stored data, programs, files, etc., we suggest you try the above solutions. If all other solutions fail to resolve the problem, then finally try this solution but make sure to back up all your essential data and programs before doing this. 

Let's start to perform a system restore with System Restore Command:

Follow the below steps to perform a system restore:

Step 1. Type "rstrui" in the Windows Run utility and click "OK".

Step 2. Click "Choose a different restore point."

Step 3. Opt for the following option to review the list if a suggested restore point is available.

Step 4. If unsure, mark the "Show more restore points" checkbox to access extra alternatives.

Step 5. Choose the earliest restore point.

Step 6. Proceed by clicking "Next" and confirming your restore point selection.

Step 7. Click "Finish" to start.

Utilizing System Restore enables you to revert your computer's settings to a prior state, effectively addressing issues due to recent modifications.

Method 7: Use the Boot Repair Tool

To fix this frustrating problem, EaseUS Partition Master comes in handy with its "Boot Repair" feature. The "Boot Repair" feature can fix multiple types of boot issues through extensive research and optimization of the product's algorithm. It's an efficient tool for fixing many other common boot-related problems.

Download it and find other useful features in EaseUS Partition Master. 

Step 1. Start EaseUS Partition Master after connecting the external drive/USB to your computer, go to "Bootable Media," and click "Create bootable media."

Step 2. Select an available USB Drive or CD/DVD and click "Create." You can also burn the Windows ISO file to the storage media.

Step 3. Connect the created bootable drive to the new computer and reboot the computer by pressing and holding F2/Del to enter the BIOS. Then, set the WinPE bootable drive as the boot disk and press F10 to exit.

Step 4. Boot the computer again and enter the WinPE interface. Then, open EaseUS Partition Master and click "Boot Repair" under the "Toolkit" option.

Step 5: Select the system you want to repair and click "Repair."

Step 6. Wait a moment, and you will receive an alert that the system has been successfully repaired. Click "OK" to complete the boot repair process.

What Caused The Computer Has Rebooted From A BugCheck?

Understanding the reasons behind the "The computer has rebooted from a bugcheck" system error is essential to find practical solutions and restore stability to your PC. Here are some potential reasons:

• RAM corruption
• Insufficient RAM
• Outdated device drivers
• Corrupted system files

Any number of reasons can cause the system to crash, go into boot loops, reboot frequently, and so on. But don't worry. This can be fixed in no time. This tutorial provides practical solutions and troubleshooting methods to tackle this issue head-on. If you think is is useful to fix your boot errors, click the link below to share it with others in need.

Conclusion

That's it to solve the error "The Computer Has Rebooted From A BugCheck." By utilizing any solution among the above-discussed eight solutions, you can get rid of this intimidating issue. If you seek the most convenient and automated solutions, use the "Boot Repair" feature of EaseUS Partition Master.  

FAQs About The Computer Has Rebooted From A BugCheck

If you have further queries/questions or want to learn more about the "The Computer Has Rebooted From A BugCheck" error, read the frequently asked questions below.

1. What is the Windows bugcheck?

The Windows bugcheck, AKA (BSOD) a Blue Screen of Death, is an error displayed on Windows systems that indicates critical problems and forces the system to shut down to prevent losing data.

2. What is BugCheck 0x0000001A on Windows?

BugCheck 0x0000001A, also known as MEMORY_MANAGEMENT, occurs when the Windows operating system detects issues with the computer's memory management. Faulty RAM, driver conflicts, or software issues can cause this.

3. How to fix Bugcheck 0x00000116 on Windows?

BugCheck 0x00000116, referred to as VIDEO_TDR_ERROR, indicates that the display driver failed to respond promptly, causing the system to crash. This error is commonly associated with graphics card or driver issues. You can tackle this issue by taking these initiatives:

• Cross-check and updates the Windows installation
• Update Graphics Drivers
• Check for Overheating
• Adjust Graphics Settings
• Check for Hardware Issues
• Perform System File Check
• Restore system