Free Hard Disk Repair Software for Disk Repair | Step-By-Step Guide

HDD Repair Solutions - Page Content

1. Part 1. Possible Causes of Hard Drive Disk Errors
2. Part 2. How to Perform Hard Disk Repair With Free Hard Drive Repair Software
3. Part 3. How to Prevent Hard Drive Corruption and Data Loss
4. Part 4. Hard Disk Repair FAQs

If your hard drive gets corrupted due to a file system error or the hard drive turns RAW, don't panic. This guide will provide you with detailed steps to repair a corrupt hard disk without losing data. To do this, you must first check if the logical error prevents you from accessing the hard drive. If so, you can check and perform a hard disk repair. If it is a physical hard drive problem, you must send it to the data recovery or repair service center. 

Possible Causes of Hard Drive Disk Errors 

Before you try to repair the hard drive, you should know the reasons that cause hard drive corruption. Here is the list of top reasons for hard drive failure:

• Virus attack
• Physical bad sectors
• Sudden system shutdown or crash
• Human errors
• Power supply and overheating problem

Now that you know what causes hard drive failure, you can repair the hard drive to solve your problem.

How to Perform Hard Disk Repair with Free HDD Repair Software

Before you start, you should manually check your fan's power supply and heat. Make sure that they are working properly. Only then, follow the following solutions for HDD repair:

1. Run Antivirus

Connect the hard drive to another Windows PC and use a reliable antivirus to scan the drive. Sometimes, viruses and malware can cause such errors. Therefore, an antivirus scan may repair the corrupted hard drive and make the drive accessible.

2. Check and Repair Hard Disk Error in Windows 10/8/7 

Try a Windows built-in tool first to check and repair hard drive errors. If it works, you can fix recoverable data. Here's how to do it in the Windows operating system:

Step 1. Open "This PC/Computer", right-click the hard disk or partition which you want to check, and click "Properties".

Step 2. Select "Tools" and click "Check now" under Error-checking.

Step 3. Check Disk Options dialog will show up. Select any one of the options to check and repair the hard disk.

Step 4. Select and check both "Automatically fix file system errors" and "Scan for and attempt recovery of back sectors", then click "Start".

• To run this tool in read-only mode, click "Start".
• To repair errors without scanning the volume for bad sectors, select the "Automatically fix file system errors" checkbox and click "Start".
• To repair errors, locate bad sectors, and recover data, click "Scan for and attempt recovery of bad sectors" and click "Start".

After the full repair process, your hard disk or hard drive partition should work normally. You can then try to access the saved data on the hard drive.

3. Run SFC Scan

The SFC Scannow option is one of the several specific switches available in the SFC command. It helps fix the damaged or missing Windows system files that may cause drive corruption.

Step 1. Open a command prompt window. 

Step 2. Type sfc /scannow in the command prompt window and hit Enter on the keyboard.

If the drive is portable, type SFC /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=c:\windows and replace the letter c: with your hard drive letter.

Wait for the scan to finish, exit the command prompt, and then restart the system. Try and see if you can access your hard drive.

4. Turn to Hard Disk Repair Experts (Recommended)

If your HDD is making a clicking or grinding noise, it could be due to a head crash or motor failure. One of the most reliable ways to repair hard disk errors is using a data recovery service. EaseUS hard drive data recovery service is authorized by Western Digital, Fujitsu, Hitachi, Samsung, and Toshiba to open and repair their hard drives and recover data without voiding the warranty.

5. Check the File System with Free Hard Disk Repair Software

To check and repair file system errors that cause hard disk drive corruption, you can use the free hard disk repair software - EaseUS Partition Master. It enables you to check and repair bad sectors and then prevent data corruption by fixing file system errors with the Check File System feature.  

5. Use Powerful Data Recovery Software and then Format Hard Disk

If the above methods fail to repair the corrupt hard drive and it's still in RAW, then the corruption is severe, and you need to format it. In this case, you should use professional data recovery software - EaseUS Data Recovery Wizard quickly restores lost files from corrupted hard disks, recovers formatted hard drives, and restores data from deleted partitions before you format the hard disk. Even when Windows can't recognize a corrupted hard drive as usable, this powerful data recovery software still supports recovery from a corrupt (RAW) hard drive.

Go ahead and download this hard drive recovery software and follow the guides below to restore lost data on a hard disk or recover deleted files in Windows 10/8/7.

Step 1. Select the drive where you lose your data and click "Scan".

Step 2. Use "Filter" or "Search" to find the lost files when the scan completes.

Step 3. Select all the files you want and click "Recover". Then, browse another secure location to save them.

The video tutorial shows how to recover data with EaseUS hard drive recovery software.

How to format a hard drive for hard disk repair

After successful lost data recovery from the corrupt hard drive, format the drive in Disk Management to repair the hard disk. Then, move the restored data to the hard drive.

Step 1. Right-click "This PC" and choose "Manage".

Step 2. Go to "Disk Management".

Step 3. Right-click the target hard drive partition and choose "Format".

Step 4. Set the volume label and file system, and click "OK" to start formatting the drive.

How to Prevent Hard Drive Corruption and Data Loss

How to avoid hard disk corruption and data loss issues on your PC in Windows 10/8/7? We have some tips for you below.

• Run the CHKDSK command to check and repair hard disk errors frequently.
• Clean up viruses with antivirus software in time.
• Frequently defragment the drive
• Do not force the shutdown using the power button
• Back up important data on HDD regularly. (External storage devices are recommended.)
• Use EaseUS hard disk repair software to recover data from HDD in time when data loss happens.

Hard Disk Repair Frequently Asked Questions

Read more about HDD repair and hard drive repair software.

Can a hard disk be repaired?

There are two types of hard drive errors: logic and physical errors. In most cases, Windows is able to repair a logic error, as it's almost always related to a software mishap. Formatting the drive will almost always fix this. But, if it's a physical corruption, it can not be repaired. You need to replace the damaged hard drive with a new one.

How do you fix a corrupted hard drive?

You can use EaseUS free hard disk repair tool to perform HDD repair:

1. 1. Download and install EaseUS free hard driver repair tool on your Windows computer. 
2. 2. Find your hard disk, right-click it, and choose Check File System.
3. 3. The disk repair tool will check your hard disk and repair the HDD error.

How to repair a damaged external hard drive?

How to repair an external hard drive without any cost with free external hard drive repair software:

1. 1. Connect your external hard drive to the computer.
2. 2. Download EaseUS external hard disk repair software for free.
3. 3. Right-click the external hard disk and choose Check File System.
4. 4. EaseUS hard drive repair tool will check and fix the corrupted hard disk.

Hard drive repair software free download full version?

Hard disk health check and repair software is free to download. You can download the EaseUS free hard disk repair tool to repair a corrupted hard disk or external hard drive.

What's the best free hard drive repair software for Windows 10?

1. 1. Windows built-in hard drive error-checking tool
2. 2. EaseUS free hard drive repair software
3. 3. EaseUS powerful data recovery software to recover data from hard disk

How can I repair my hard disk with a bootable hard disk repair tool?

When your hard drive is damaged, and your computer can't boot, how can you repair the damaged hard drive? Download and use the pro version of EaseUS Partition Master to repair the HDD with a bootable drive.

1. 1. Prepare a storage media, like a USB flash drive or a CD/DVD disc.
2. 2. Launch EaseUS Partition Master and click the WinPE Creator feature on the top.
3. 3. Follow the on-screen instructions to Create an EaseUS Partition Master bootable drive.
4. 4. Start your computer from the USB bootable drive.
5. 5. Right-click the corrupted hard disk and choose Check File System to repair HDD.