Featured Articles
- 01 Why Computer Won't Turn On
- 02 Computer Won't Turn On Though Plugged In
- 03 Computer Won't Boot After OS Update/Rebuild
- 04 PC Not Turning On with Black Screen
- 05 Fix 1: Boot Device Not Found
- 06 Fix 2: Your PC Ran into a Problem and Needs to Restart
- 07 Fix 3: Laptop Screen Black but Still Running
- 08 Fix 4: Windows 11/10/8/7 Won't Boot from SSD
- 09 Fix 5: Recover Data from a PC/LaptopThat Won't Boot
- 10 Bonus Tip for Mac Won't Boot After Big Sur/Catalina Update
"I recently replaced my computer system disk with a new SSD disk. Now the problem is that I cannot boot from the SSD, how to solve this issue?"
If you are running into the same problem and trying to fix it on your own, follow the three solutions here.
Workable Solutions | Step-by-step Troubleshooting |
---|---|
Fix 1. Boot Windows from BIOS | Use a SATA cable to connect the SSD, restart...Full steps |
Fix 2. Rebuild SSD and set to active | Click "WinPE Creator" to create a bootable...Full steps |
Fix 3. Fix BCD and boot | Check solutions to either an MBR or GPT SSD...Full steps |
Fix 4. Watch Video Tutorial for effective solutions | Video guide on how to correct BCD errors after System clone. Full steps |
Causes of Windows not Booting from SSD Error
The cases mentioned above are two real problems that happen to SSD users on Windows 11/10, 8 or 7 computers. Most of them don’t know how this problem happens and none of them have solutions to fix these troubles. If you are one of them, don’t worry. We have solutions for you. Let’s figure out why or how does your computer cannot boot on SSD drive first. Why does this error show up? Basically, this error occurs in these situations:
- System disk upgrade: computer won’t boot from new SSD after upgrading disk from HDD to SSD.
- Windows system error/failure.
- Computer fails to boot after the system update.
- SSD disk internal error.
- The SSD is cloned and won't boot.
After you have figured out the reasons, you are able to solve this case. Here are some tried and true solutions to deal with the SSD booting error. If you'd like a fresh try, you can follow this page to Install or Migrate Windows OS to SSD without boot issue. And if you think these causes and solutions are helpful for you to understand Windows not booting error, you can share with other people in need!
Solutions 1. Set Windows to Boot from SSD via BIOS
If your computer cannot boot after upgrading or replacing system disk from HDD to SSD, the proper reason for this problem is that you may fail to reset the boot order in BIOS. To change the boot mode, you can refer to the following to configure it:
1. Use a SATA cable to connect the SSD to your computer.
2. Restart your PC. Continuously press a specific key (usually F2, F8, F12, Del) to enter BIOS Setup.
3. Then, use the arrow keys to select Boot Option. Here, you can change the boot order to boot from the cloned SSD.
![related articles](/images_2019/article/star.png)
How to Fix BIOS Recognizes SSD But Won't Boot
Troubleshoot why BIOS recognizes SSD but won't boot to learn effective fixes & solutions to resolve this issue and get your system running smoothly.
![ssd wont boot](/images/en/screenshot/partition-manager/change-legacy-to-uefi.png)
Solution 2. Rebuild the SSD and Set it as Active
For this case, we suppose your SSD is MBR. Once MBR (Master Boot Record) disk is damaged, the system cannot be booted. In this situation, to rebuild MBR rather than reinstall the Windows will be much more convenient and time-saving. You only need to do two things: rebuilding the MBR and setting it active.
EaseUS Partition Master has already offered the function to rebuild MBR in the case of boot failure due to MBR problems.
Note: Since your PC cannot boot from the SSD properly, connect the MBR hard disk to another working computer for repair. Or create a WinPE bootable disk to make your computer bootable.
To Rebuild MBR:
Step 1. Create a WinPE bootable disk
- Launch EaseUS Partition Master, and click "Bootable Media" on the toolbar. Select "Create bootable media".
- Click "Next" to finish the process.
![create a bootable disk](/images/en/screenshot/partition-manager/screenshots/create-bootable-disk-1.png)
Step 2. Boot EaseUS Partition Master Bootable USB
- Connect the bootable USB or CD/DVD to your PC.
- Press F2 or Del when you restart the computer to enter the BIOS screen. Set and boot your computer from "Removable Devices" or "CD-ROM Drive". And then EaseUS Partition Master will run automatically.
Step 3. Rebuild MBR
- Click "Toolkit" and choose "Rebuild MBR".
- Select the disk and the type of MBR. Then, click "Rebuild".
![rebuild MBR](/images/en/screenshot/partition-manager/screenshots/rebuild-mbr-2.png)
- After that, you can see "MBR has been successfully rebuilt on Disk X".
![rebuild MBR](/images/en/screenshot/partition-manager/screenshots/rebuild-mbr-3.png)
Read Also: Windows 10 Won't Install on SSD
After you have rebuilt the SSD, you need to set the system partition as active.
To Set an Active Partition:
You still need the partition magic software to help you set the system partition active.
- Important
- Before you make a partition active, you must make sure it is formatted and contains an operating system. Otherwise, your PC cannot boot from this partition!
- If you set a partition as active and there was another active partition on the disk, it will be unset automatically. This might also prevent your PC from booting.
Step 1. Run EaseUS partition manager software. On the disk map, right-click the target partition and choose "Advanced".
Step 2. Then, select "Set Active" from the drop-down menu. Click "Yes". And choose "Execute 1 Task(s)" and click "Apply".
Then you can reboot your computer and boot from the SSD. If you still cannot boot from the SSD, the BCD error might be the main cause.
![related articles](/images_2019/article/star.png)
Solved - Windows Not Booting After Installing New SSD
Your new SSD should boot Windows without issues after installation; however, if it doesn't, then continue reading, as this article will help you resolve the issue.
![motherboard search](/images/en/screenshot/partition-manager/motherboard-search.png)
Solution 3. Fix the BCD Error to Make the SSD Boot
MBR and GPT SSD have different steps, find the solutions respectively to solve the BCD error and then boot from your SSD.
1 - The SSD is MBR.
Step 1. If the system partition doesn't have a drive letter, assign one for it.
- Open Disk Management under Storage by right-clicking Computer/This PC > Manage.
- To assign a drive letter if one has not already been assigned, select the partition, click Add, click the letter that you want to use, and then click OK.
Step 2. Run Command Prompt as administrator.
Here, we suppose the system partition is E: Then, run the command:
bcdedit /store E:\boot\bcd
Check that the System and boot pointers are correct after running. If they are not correct, use the /set command to fix them. For example, if the system partition should be M: it becomes E: You can follow this to fix it:
Bcdedit /store M:\boot\bcd /set {bootmgr} device partition=M:
2 - The SSD is GPT.
Step 1. Set the partition ID as basic ID.
The BCD mode on the GPT system is similar to the MBR, except that the GPT system disk is an EFI partition. You need to modify the partition ID to the Basic data partition ID by using the Diskpart set command on the EFI partition.
set id=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Step 2. Assign the drive letter and view BCD information
Then assign the drive letter. If the assigned drive letter is M:, then run the BCD edit command to view the BCD information.
bcdedit /store M:\EFI\Microsoft\Boot\BCD
If the partition is pointed to an error, use the /set command under BCD edit to modify it correctly. The modification is the same as that in the MBR. If there is a startup problem after modifying the BCD correctly, you need to check the Active partition is set for the MBR disk while the GPT system disk needs to add the startup item. If you still have the problem, you can also contact us.
Further Reading:
Fix 4. Video Tutorial On Windows Does not Boot After Clone
You May Also Like:
Was This Page Helpful?
![](https://www.easeus.com/images/en/icon/author10.png)
Cici is the junior editor of the writing team of EaseUS. She accepted the systematic training on computers at EaseUS for over one year. Now, she wrote a lot of professional articles to help people resolve the issues of hard drive corruption, computer boot errors, and disk partition problems.
![](/images/en/icon/tracy.jpg)
Written by Tracy King
Tracy became a member of the EaseUS content team in 2013. Being a technical writer for over 10 years, she is enthusiastic about sharing tips to assist readers in resolving complex issues in disk management, file transfer, PC & Mac performance optimization, etc., like an expert.
Related Articles
-
Getting Windows 11 Boot Loop? Troubleshoot This Error Now - EaseUS
Tracy King/Dec 14, 2023
-
Wyze Cam SD card Format: How to Format SD Card for Wyze Cam?
Tracy King/Jan 16, 2024
-
How to Format SD Card to NTFS on Android and PC [2024 Step-by-Step Guide]
Tracy King/Jan 04, 2024
-
Change File Extension One-by-One and in Bulk
Tracy King/Nov 15, 2023